Home > Spares & Accessories > Machine Vices Go Back
REQUEST PRICE

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • TEST
  • Model:
  • ROUNDNESS TESTING FAG MOD. FMS 4210
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:

DESCRIPTION

FAG New05644 ROTATION AXIS "C AXIS": -Diameter of rotary table 200 mm -Max load capacity 500 N -Max control diameter 300 mm, se il tastatore è posizionato al di sopra del pezzo -Max passage diameter 420 mm -Air bearing -Roundness deviation (sensing direction axisl, measured acc. to ISO 1101) 0.08 ųm at the centre + 0.0008 ųm per mm measuring height -Roundness deviation (sensing direction axial measured acc. to ISO 1101) 0.08 ųm at the centre + 0.0008 ųm per mm radius -Drive: position controlled direct-current motor -Resolution angle measuring system 0.045° -Measuring speed 1.5/3/6/12 min¯¹, variable -Centering range +/- 2.5 mm -Levelling range +/- 30' -Tilting point 30 mm above table surface VERTICAL AXIS "AXIS Z": -Measuring distance 350 mm -Straightness deviation (acc. to ISO 1101) 0.25 ųm/100 mm - 0.8 ųm/350 mm -Air bearing -Position controlled direct-current motor -Resolution distance measuring system 1 ųm -Measuring speed 15,60,300 mm/min, variable, optimal -Moving speed 18 mm/s continuously adjustable by hand lever -Rectangularity relative to C axis: 0.5 ųm/350 mm in sensing direction 2.5 ųm/350 mm at an angle of 90° off the sensing direction HORIZONTAL AXIS "R AXIS": -Measuring distance 150 mm -Straightness deviation (measured acc. to ISO 1101) 1.0 ųm/150 mm -Slide bearing -position controlled direct-current motor -Distance measuring system 1 ųm resolution -Measuring speed variable -Moving speed 25 mm/s continuously adjustable by hand lever -Rectangularity relative to C axis'' SENSING SYSTEM ST200: -Inductive sensing system -Sensing direction bidirectional (no manual switching required) -Measuring range +/- 500 ųm for the 74 mm sensing stylus -Measuring force applied for the 74 mm sensing stylus -Deviation in linearity 1% of the measuring range maximum COMPUTING SYSTEM: -Evaluation computer: freely programmable computer system with colour graphics -Screen 14'' colour -Hard disk 20 MByte -Floppy disck drive 3,5'' -Output unit: dot-matrix printer (laser printer optional) DIMENSIONS: -Height 1720 mm -Width 1760 mm -Front-to-back size 815 mm -Weight 380 kg USED MATERIAL
+ request more information

SEND ENQUIRY

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

You may also be interested in these Machines

    •
      Manufacturer:
      Hwacheon
      Model:
      Hwacheon Vesta-1050B
      Description:
      {"Table Size": "1150mm x 600mm", "X Axis": "1050mm", "Y Axis": "600mm", "Z Axis": "600mm", "Spindle Speed": "6000rpm, 8000rpm", "Spindle Motor": "25hp", "Tool Storage": "24, 30 Tools", "Spindle Type": "BBT 40, BBT 50", "Machine Weight": "7500kg", "Op...

      More Info

    • Manufacturer:
      Correa
      Model:
      MILLING CORREA CM 55
      Description:
      CORREA 07265 STROKE AXIS: X mm 1100 Y mm 400 Z mm 550 n. 12 Spindle speed 40 - 1800 EQUIPPED WITH: Digital readout 3 axis Horizontal spindle USED MACHINE

      More Info

    • Manufacturer:
      MACH
      Model:
      MEASURING MACHINE
      Description:
      RUPAC 09885 MOD. INSPECVISTA 3020A X-axis travel mm 300 Y-axis travel mm 200 Z-axis travel mm 200 Type of swan neck structure Structure composition granite+steel Video system: -1/3'' CCD camera (800x600 pixels) -Laser pointer for quick identification...

      More Info

    • Manufacturer:
      Model:
      WELDING CEA TECH 400 PULSED
      Description:
      07780 Welding current range A 40-400 Absorbed power kVA 14,2 Power factor cos 0,9 Max open circuit voltage V 70 Welding current at 100% duty cycle A 270 Welding current at 60% duty cycle A 350 Welding current at 50% duty cycle A 400 Wire diameter mm ...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User